Scooterotica

Does anyone have experience/recommendations for a good small frame clutch on a tuned motor.
Building a Polini EVO running which should be aprx 18-20bhp (7500-8k revs)
I have the FA 6 spring unit, SIP do a race set of carbon plates and springs (green), no rating on what this will take.
Cheers

I use a bsg superstrong on a malossi 135 with a longer stroke and rod, it's been very good so far.

Sent from my SM-G920F using Tapatalk

Xl2 clutch set up with carbon plates and stronger springs....
18-20 brake shouldnt need anything to expensive or trick....It does depend of course how much your going to abuse it tooo ...........Loads i hope..
My old polini tuned grass track/sprint machine used a single centre spring BUT made from square steel ( polini i think) and worked great with standing larges amounts of abuse !!!!