Page 1 of 7

Clubman exhausts...

Posted: Thu Aug 18, 2016 4:28 pm
by Timbo
What are the alternatives to the BGM big bore. I've heard the version 3 BGM is more restrictive, anyone noticed this?

Re: Clubman exhausts...

Posted: Sat Aug 20, 2016 1:19 am
by corrado
This is how these rumours become fact.

50mm Gori may give better top end but you'll complain about the noise.

Re: Clubman exhausts...

Posted: Sat Aug 20, 2016 9:08 am
by Tractorman
corrado wrote:This is how these rumours become fact.

50mm Gori may give better top end but you'll complain about the noise.
If you get it to fit in the first place, I tried to fit one some time ago and found the top bracket holes were 15mm forward of the studs. Camlam told me to cut the bracket and re-weld!!!

Re: Clubman exhausts...

Posted: Sat Aug 20, 2016 11:40 am
by Timbo
How did it perform?

Re: Clubman exhausts...

Posted: Sat Aug 20, 2016 1:45 pm
by immylam
what I have noticed is.....the s**t quality, BGM, ancilotti, indian big bore , they all manage to shake baffles loose or snap at the swan neck, poor sealing etc after about a years use. P*ssed off with them as I don't really want an expansion exhaust on my Jet. Not sure about the scootopia , might try that next....and expect a different outcome

Re: Clubman exhausts...

Posted: Sat Aug 20, 2016 9:55 pm
by stew
Tractorman wrote:
corrado wrote:This is how these rumours become fact.

50mm Gori may give better top end but you'll complain about the noise.
If you get it to fit in the first place, I tried to fit one some time ago and found the top bracket holes were 15mm forward of the studs. Camlam told me to cut the bracket and re-weld!!!
Was the bad fitting Gori on a standard length conrod 107mm? If so that beggars belief as there not exactly cheap!!

Re: Clubman exhausts...

Posted: Sat Aug 20, 2016 10:10 pm
by Tractorman
stew wrote:
Tractorman wrote:
corrado wrote:This is how these rumours become fact.

50mm Gori may give better top end but you'll complain about the noise.
If you get it to fit in the first place, I tried to fit one some time ago and found the top bracket holes were 15mm forward of the studs. Camlam told me to cut the bracket and re-weld!!!
Was the bad fitting Gori on a standard length conrod 107mm? If so that beggars belief as there not exactly cheap!!
Standard

Re: Clubman exhausts...

Posted: Sat Aug 20, 2016 10:12 pm
by YAMLAM
Beg, Steal or Borrow a RS clubman, best fitting exhaust i ever owned in 37 years of scootering.

Re: Clubman exhausts...

Posted: Sun Aug 21, 2016 8:22 am
by soosh
Agree on the RS clubman. Fits perfect,mines still going strong.
But I've just bought the Gori GP50 from Rimini Lambretta. Their version is quieter and spparently only available to them. It's fitted to my iron RS200 and it fantastic. Fits great,not offensively loud and pulls like f@@k even two up.

Re: Clubman exhausts...

Posted: Sun Aug 21, 2016 9:28 am
by Timbo
What did you have before?