Page 1 of 1
dellorto phbh 30 which float's
Posted: Sat Jun 11, 2016 4:03 pm
by tavspeed
scoot didn't seem to be running right.bit rich,so took float bowl of to find one of the float chambers full of petrol,seem to have read some where that these white type fail regulary due to the ethanol in petrol and the black one's are the preferred type.
now looking on wasp performance they list 2 types,one 8.3 grammes,one 11.3 grammes,any ideas which one for a phbh 30,
i take it the heavier one will give a higher level in the float bowl,tia.
Re: dellorto phbh 30 which float's
Posted: Sat Jun 11, 2016 4:52 pm
by Adam_Winstone
I'm pretty sure that my black ones are either 8 or 9 grms.
Adam
Re: dellorto phbh 30 which float's
Posted: Sat Jun 11, 2016 5:33 pm
by tavspeed
just had a look at them and they have 6.5 grammes stamped on them,which i can get fron euro carb,but would prefer the black ones which are 8.5 grammes and 1/3rd of the price from wasp performance,could this alter the mixture as the petrol level in the float bowl would be diffrent,cheers
Re: dellorto phbh 30 which float's
Posted: Sat Jun 11, 2016 5:55 pm
by a.lo.v2
some one i know had this problem and contacted Dellorto and they said the white ones should not be supplied in the UK.
Re: dellorto phbh 30 which float's
Posted: Sat Jun 11, 2016 7:13 pm
by tavspeed
just ordered the 8.3 gramme black one's,they have the same buoyancy as the 6.5 gramme white ones and are a straight swap
Re: dellorto phbh 30 which float's
Posted: Sat Jun 11, 2016 7:22 pm
by garry inglis
thats good to no thanks tavspeed
Re: dellorto phbh 30 which float's
Posted: Sat Jun 11, 2016 7:29 pm
by tavspeed
check out wasp performance for dellorto spares,excellent prices and fast delivery.