Bgm clubman ts1 28phbh jetting
Posted: Fri May 20, 2016 10:29 pm
Built a mugello 225 reed with a 28phbh and bgm clubman..ive jetted it RICH ...saying that its ridable...trouble is ive done 10 miles and used half a tank of fuel
....so if any of you ts1 guys are using a 28 delly can you share your jetting.
Im currently jetted rich at
266 atomizer
X2 needle on clip 2
135 main
55 idle
40 slide
I can lean it off but ive holed pistons in the past so im ultra cautios...but at 10 miles per gallon im open to suggestions
Cheers
Im currently jetted rich at
266 atomizer
X2 needle on clip 2
135 main
55 idle
40 slide
I can lean it off but ive holed pistons in the past so im ultra cautios...but at 10 miles per gallon im open to suggestions
Cheers