Scoot RS Dics brake
Posted: Wed May 11, 2016 9:26 pm
Has anyone a parts diagrame for a Scoots RS dics I can't find one anywhere... My dics was stripped by the chap spaying it and we think there are a few parts missing
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Scoot RS Dics brake
Page 1 of 1
Re: Scoot RS Dics brake
Posted: Wed May 11, 2016 9:40 pm
You might find an exploded diagram of the Italian one. Wouldn't they be the same?
Re: Scoot RS Dics brake
Posted: Wed May 11, 2016 10:19 pm
Inboard should be the same but Innocenti never made an outboard. 
Re: Scoot RS Dics brake
Posted: Wed May 11, 2016 11:40 pm
Sorry it's an outboard hydrolic brake
Re: Scoot RS Dics brake
Posted: Fri May 13, 2016 1:40 am
Long spacer tube in centre of hub, bearing either side of that and seal either side of each bearing. Axle goes through the caliper mounting plate then through the speedo housing cover, then small spacer tube goes on axle then feed axle through the hub, insert top hat over axle on the nearside then thick nut goes on.
Re: Scoot RS Dics brake
Posted: Sat May 14, 2016 3:57 pm
Couldnt get mine on with the thick nut without levering link out. Swapped it for the standard half nut and alls good.