Scooterotica

Posted: **Fri Apr 22, 2016 8:47 pm**

I have a legshield toolbox and the door rattles. Ideally I think it needs a bit of trim around the lip to prevent vibration. What have people used to solve the problem?

Posted: **Fri Apr 22, 2016 8:55 pm**

shouldn't need any - bend the inner lock bit.

Posted: **Fri Apr 22, 2016 9:04 pm**

I might have too.

Posted: **Fri Apr 22, 2016 11:27 pm**

Fit Vespa toolbox buffers in the top corners

Posted: **Sat Apr 23, 2016 11:42 am**

Doom Patrol wrote:I have a legshield toolbox and the door rattles. Ideally I think it needs a bit of trim around the lip to prevent vibration. What have people used to solve the problem?

I did exactly as you thinking...
Got some door trim from Beedspeed, give them a buzz m8

Posted: **Sat Apr 23, 2016 3:53 pm**

Sent from my SM-G903F using Tapatalk

Posted: **Sat Apr 23, 2016 3:59 pm**

Jam a bit of cardboard in it

Posted: **Mon Apr 25, 2016 7:59 am**

Four little rubber buffers from the local hardware store, drilled and bolted one in each corner, Bob's your uncle!

(Guess it depends on what type of toolbox you have)

Posted: **Mon Apr 25, 2016 9:50 pm**

That's a good idea. Unfortunately it isn't one of them. Bristolmod seems to have come up trumps at the moment. A bit of jiggling of the lock seems to have tightened it up.

Posted: **Tue Apr 26, 2016 7:46 pm**

this is what I use on frame/toolbox door and legshield toolbox door

http://www.ebay.co.uk/itm/201481150392? ... EBIDX%3AIT

Scooterotica

Toolbox Trim

Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim

Re: Toolbox Trim