Sip valves
-
DickieD
- registered user
- Posts: 37
- Joined: Wed Apr 07, 2010 8:12 pm
- Main scooter: 1970 GP 200
- Location: Plymouth
- Contact:
Anybody know the thread size do sip valves? I have snapped one in the rim and it needs re tapping. I've used a thread gauge on it and it's a m8 x 0.8 which is a unusual size has anybody had to do this before?
-
Grumpy225
- registered user
- Posts: 650
- Joined: Sat Nov 24, 2012 7:59 am
- Main scooter: Gori200, rt195, ld150,rb20
- Location: Bakersfield, CA
- Contact:
If you are talking about the alloy tubeless rims it will be a weird size.
look for a Schrader valve tap. I have one and had to have it special ordered ($75 if I remember right). All so I could clean out some threads from powdercoating
look for a Schrader valve tap. I have one and had to have it special ordered ($75 if I remember right). All so I could clean out some threads from powdercoating
