GT186 ring gap
-
psychedelicropcircle
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact:
0.80mm is this to big ?
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
service limit is generally quoted as 0.5mm on standard barrels would have thought the same on GT.
Interesting article here -
http://www.diagnosticengineers.org/jour ... 20Gaps.php
originally found by Warkton Tornado No1 and posted on the other site
Interesting article here -
http://www.diagnosticengineers.org/jour ... 20Gaps.php
originally found by Warkton Tornado No1 and posted on the other site
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
-
Rich_T
- Dealer
- Posts: 540
- Joined: Fri May 29, 2009 8:07 pm
- Main scooter: Li Special
- Location: Birmingham
- Contact:
typical clearance is 20 thou which is about or 0.5mm 0.8 is getting to the top end. Measure the bore and measure the rings to confirm which has worn. Typically, you'll get away with replacing just the rings if everything is looking OK. If you are in doubt Email me some pictures, my address is in my profile or find me through the web.