T5 MK1 1990 wiring
Posted: Sat Feb 13, 2016 9:09 pm
Just pulled a mates apart and there are 2 wires pulled from the headset blocks,
1 x plain black,
1 x black and white.
Any idea which goes in the 5 pin side,
And on the other side I have 4 holes and 3 wires, so an indication of which hole would be good.
Thanks,
Shaun.
1 x plain black,
1 x black and white.
Any idea which goes in the 5 pin side,
And on the other side I have 4 holes and 3 wires, so an indication of which hole would be good.
Thanks,
Shaun.