Scooterotica

Its probably been asked before. I cannot find the answer.
Which is best the px200 or p200e engine, in terms of aftermarket cylinder, gearing and tuning etc.

Robbie

For myself the EFL motor without question. Only downside from the earlier motor is the internal rather than external hub seal.

I use a combination of both

early casings as I don't want autolube - as said it has the external rear hub seal but I use the EFL gearbox parts (better cruciform set up) and a COSA clutch.

other than the g/b parts fundamentally everything else is the same/interchangeable - crank, top end etc

Gaz

OK,
Thank you for the replies.

Robbie