Setting Up a Standard PX200 Carb
Can any one give me a quick step by step on how to set up the carb from scratch (how many airscrew turns etc). Thanks.
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
standard carb with standard barrel and exhaust ? if so
Jet as spec
set the air screw at 1.5 out, warm bike up and take it out/in 1/4 turn at a time and see what effect on engine - optimum set between 1.5 to 2.25 outward
Jet as spec
set the air screw at 1.5 out, warm bike up and take it out/in 1/4 turn at a time and see what effect on engine - optimum set between 1.5 to 2.25 outward
Cheers Gaz, standard top end with a big bore standard type exhaust but have upjetted to suit. Thanks for the info.