Not another series 2 (update)
Posted: Mon Jan 12, 2009 3:15 pm
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Not another series 2 (update)
Page 1 of 5
Re: Not another series 2 (update)
Posted: Mon Jan 12, 2009 3:23 pm
Part 2 
Re: Not another series 2 (update)
Posted: Mon Jan 12, 2009 3:32 pm
Part 3 
Re: Not another series 2 (update)
Posted: Mon Jan 12, 2009 3:47 pm
part 4 Got an engine at last 
Thats it so far
Thats it so far
Re: Not another series 2 (update)
Posted: Mon Jan 12, 2009 7:44 pm
Gorgeous colour "Simon".....by the way do you sleep downstairs?..........
Re: Not another series 2 (update)
Posted: Mon Jan 12, 2009 11:16 pm
Nice restoration!
I have a series 2 winter for a future project, with the legshield, rear footboards and the panels in very bad condition (20 years below a tree
) , and i see that you have buyed a new parts.
Where did you buy? are made of good quality or need too much work?
I have a series 2 winter for a future project, with the legshield, rear footboards and the panels in very bad condition (20 years below a tree
) , and i see that you have buyed a new parts.Where did you buy? are made of good quality or need too much work?
Re: Not another series 2 (update)
Posted: Tue Jan 13, 2009 12:20 am
Looking nice mate... seen it over at John's just before crimbo.
Re: Not another series 2 (update)
Posted: Tue Jan 13, 2009 8:23 am
Hi ArKaTxU the legshields front mudguard, legshield toolbox and rear runners are from Corrado at Just Lambretta http://www.lambrettaspareparts.com we stripped them down to bare metal just to be on the safe side, it gave the painter more work but worth it in the end, although you could just give them a wet and dry and then paint them without going to all that trouble 
The legshield toolbox is a great fit with minimal fettling
The legshield toolbox is a great fit with minimal fettling
Re: Not another series 2 (update)
Posted: Tue Jan 13, 2009 8:27 am
Thanks lambrusco just taking my time with it and hoping to have it ready for KelsoLooking nice mate... seen it over at John's just before crimbo
Re: Not another series 2 (update)
Posted: Tue Jan 13, 2009 1:14 pm
OK, i know Corrado. When i go with this project i will speak with him about this.simon wrote:Hi ArKaTxU the legshields front mudguard, legshield toolbox and rear runners are from Corrado at Just Lambretta http://www.lambrettaspareparts.com we stripped them down to bare metal just to be on the safe side, it gave the painter more work but worth it in the end, although you could just give them a wet and dry and then paint them without going to all that trouble
The legshield toolbox is a great fit with minimal fettling
The legshield toolbox look very good too!