Page 1 of 1
Tool Box Door
Posted: Mon Jul 13, 2015 3:45 pm
by ABC123
Does anyone make a recessed tool box door to work with an in-line spare wheel carrier?
cheers
Re: Tool Box Door
Posted: Tue Jul 14, 2015 10:52 am
by shocky
Someone called tim mason
Re: Tool Box Door
Posted: Tue Jul 14, 2015 11:41 am
by stokky
Think the ones Tim does are fibre glass.
I just put an advert in wanted section (or maybe facebook lambretta for sale), and managed to get a home made metal one.
Re: Tool Box Door
Posted: Tue Jul 14, 2015 12:06 pm
by ABC123
stokky wrote:Think the ones Tim does are fibre glass.
I just put an advert in wanted section (or maybe facebook lambretta for sale), and managed to get a home made metal one.
wanna sell it?
Re: Tool Box Door
Posted: Tue Jul 14, 2015 6:41 pm
by shocky
If your on facebook kris green at mental engineering
Re: Tool Box Door
Posted: Wed Jul 15, 2015 2:08 pm
by stokky
sorry mine, not for sale, have used it.
Also will need a toolbox lock without the tail on it, as interferes with tyre etc otherwise !
Re: Tool Box Door
Posted: Wed Jul 15, 2015 4:07 pm
by gaz_powell
Some carbon fibre ones on evilbay at minute
Re: Tool Box Door
Posted: Wed Jul 15, 2015 4:19 pm
by ABC123
gaz_powell wrote:Some carbon fibre ones on evilbay at minute
shocky wrote:Someone called tim mason
they are Tim's have been in contact but would prefer metal
cheers anyhow
Re: Tool Box Door
Posted: Wed Jul 15, 2015 8:47 pm
by wayne cudine
A series 1 or 2 tool box lock will do the job as they sit flush and have no tail.
Re: Tool Box Door
Posted: Thu Jul 16, 2015 7:18 am
by thesx200
Or turn a series 3 lock 180 degrees and cut the tail off at an angle , quite a neat solution.