Page 1 of 1
116mm race crank
Posted: Tue Jun 09, 2015 8:16 pm
by dave wheeler
who makes the best race crank with a 116mm rod, am planning a low 20`s bhp max motor, dont want to spend any more than nesesary for a reliable crank
Re: 116mm race crank
Posted: Tue Jun 09, 2015 11:10 pm
by olliewtf
harry barlow built my 60x117 (or was it 116?) crank for about 200 quid. I believe he used mec parts for mine as the webs were the same looking as all mec cranks and it had a bronze rod. Its a very reasonable price for the spec, but what bhp it could cope with i have no idea, as my scoot aint been dynoed or even ran in fully yet. My set up is small block suzuki tuned by myself, and ive chased after hp and revs, so its not a standard torquey small block, it has a very sharp power band.
Re: 116mm race crank
Posted: Wed Jun 10, 2015 11:10 pm
by B-Race Tuning
Ollie, I would have thought Harry built you a Yam rodded crank at 115? As for cranks that meet your criteria, AF, Scooter Centre, Harry of course, Cambridge (bit OTT (and pricey) for 20 brake though), Martin at Chisel.
Re: 116mm race crank
Posted: Wed Jun 10, 2015 11:37 pm
by corrado
More than likely HB will have used a 115 Yam rod. TV rod is 116.