Scooterotica

Took the easy route and bought a brand new Indian GP horncast rather than repairing the butchered threads on my Italian one. I always assumed they were the same but they aren't.





The Indian one is a good 7mm narrower at the top. This means it's far too thin for the grooves on the legshields and under the headset. It just won't do so I guess it serves me right for being lazy. Just so people know and don't make the same mistake as me

It will move, bolt it to the legshields and get some heat on it, let it cool and it should be OK

I thought the casting was different i.e. there's less metal and its physically smaller. Thanks for the tip, think I'll pass though and repair the original