i have no experience or knowledge of these barrels........ would an it175 yam piston (66mm)go in one ?(same as would go in a ts1 200)
doesn`t seem top much info on thses about
got chance of a barrel and already have piston and rd400 rod crank
any help appreciated
gary
monza 200
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
-
Fruitjuice
- registered user
- Posts: 201
- Joined: Fri Jan 09, 2009 8:26 pm
- Location: Ghent, Belgium
- Contact:
Will go in perfectly, and the IT185/YZ185 piston is good to.
I ran the Wiseco equivalent a while and never had any problems.
I don't know the RD400 rod, but mine used a 116mm rod
I ran the Wiseco equivalent a while and never had any problems.
I don't know the RD400 rod, but mine used a 116mm rod
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"