Scooterotica

Posted: **Mon Feb 23, 2015 9:14 pm**

I've got a 35mm Mikuni carb' but am unsure of what manifold and rubber is suitable to fit the Avanti.........any help/advice much appreciated

Posted: **Tue Feb 24, 2015 9:43 am**

Mick, You can get a Manifold from AF or MB to fit a Mikuni 35mm, you have to match to the inlet gasket. They should have a rubber too or you can get them from MOTO Carb.

Scooterotica

35mm Mikuni TMX on an Avanti

35mm Mikuni TMX on an Avanti

Re: 35mm Mikuni TMX on an Avanti