Rear hub seal
-
stonerosesmod
- registered user
- Posts: 78
- Joined: Sat Nov 22, 2014 8:56 pm
- Main scooter: Lambretta Li150S
- Contact:
Any tips on what to use on a PX200 EFL rear hub seal on install? Do you heat casings slightly first or should it just tap down with a socket?
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
It should go relatively easily - make sure the the casing is spotless and a thin spray of silicon grease and press home by hand or a little help with a drift if necessary i turned a hardwood solid round drift for the internal type.
-
stonerosesmod
- registered user
- Posts: 78
- Joined: Sat Nov 22, 2014 8:56 pm
- Main scooter: Lambretta Li150S
- Contact:
Cheers Gaz,will give it a go.