Page 1 of 1
best bonding agent
Posted: Tue Dec 23, 2014 4:15 pm
by ducksta
just about to change the flywheel and drive side seals on a px200, whats the best bonding compound to use,and would you use it on the flywheel seal
Re: best bonding agent
Posted: Tue Dec 23, 2014 4:36 pm
by ducksta
forgot who stocks the best seals that many to choose from
Re: best bonding agent
Posted: Tue Dec 23, 2014 4:37 pm
by gaz_powell
yamabond or 3 Bond equivalent
Its a grey solvent based sealer. It is not silicone or RTV type
and IMHO use the blue corteco seals
Re: best bonding agent
Posted: Tue Dec 23, 2014 4:51 pm
by dave411
If you mean what to use to seal the outside of the seal,where it goes into the housing,I allways use Loctite.
Re: best bonding agent
Posted: Tue Dec 23, 2014 5:11 pm
by GLscoot
I always use gasket paste and the corteco seals
Re: best bonding agent
Posted: Tue Dec 23, 2014 5:16 pm
by ducksta
orderd the corteco seals and some 3 bond
Re: best bonding agent
Posted: Tue Dec 23, 2014 6:06 pm
by hungdog
007
Re: best bonding agent
Posted: Wed Dec 24, 2014 1:33 pm
by ducksta
my seals and other bits came today!!!!!!!!!!!!!!!!!!! less then 24 hours (wasp and saxon scooters) top guys