Page 1 of 1
Pinasco Si 26 "R"
Posted: Sun Oct 05, 2014 6:34 pm
by Jay63
Just seen these advertised in Germany , does anyone have one or know anything about them and if they are any good where do I get one from ? Thanks
Re: Pinasco Si 26 "R"
Posted: Mon Oct 06, 2014 6:42 pm
by GLscoot
Re: Pinasco Si 26 "R"
Posted: Mon Oct 06, 2014 7:34 pm
by Jay63
Hi thanks but it is definitely a 26/26 that I saw , it's very similar to hot rod Al's Venturi from USA , I can't seem to find it now
Re: Pinasco Si 26 "R"
Posted: Mon Oct 06, 2014 9:20 pm
by GLscoot
Re: Pinasco Si 26 "R"
Posted: Mon Oct 06, 2014 9:50 pm
by Muttley McLadd
Bloody hell. That's pricy. Is there any advantage to it over a 30mil Delorto?
Re: Pinasco Si 26 "R"
Posted: Mon Oct 06, 2014 10:25 pm
by ricalnic
Wonder what the difference is between the above and this one in performance terms
http://www.lambretta-teile.de/Carb-26mm ... e-Vespa-PX
Re: Pinasco Si 26 "R"
Posted: Mon Oct 06, 2014 10:30 pm
by GLscoot
Muttley McLadd wrote:Bloody hell. That's pricy. Is there any advantage to it over a 30mil Delorto?
my thoughts exactly and i have heard they are a nightmare to set up. I've seen them with the polini venturi filter. i suppose the only advantage is you have the option to keep the oil pump.
i prefer pre-mix fuel, then i know its got oil.
gary
Re: Pinasco Si 26 "R"
Posted: Mon Oct 06, 2014 11:11 pm
by Juan
The downdraughts work quite well for what they are but I'd certainly not spend any money on a tarted up version. Plenty of sidedraughts out there that'll do the job better if having to premix.