Scooterotica

Anybody know where i can get some wired exhaust nuts, tried evilbay but no luck

http://beedspeed.com/vespa-cylinder-hea ... -3746.html
I used thses and drilled them myself

Ive got them in stock and will have them with me on the stall at wickstead complete with the locking wire.
K2 Custom Classics

have you tried Andy Francies

px 125 cowling distance long nuts for me as well, one cut down, one normal length, drilled and a bit of wire . the extra thread on the stud stop it coming loose as well.

Thanks for all the replies

essexgp wrote:Anybody know where i can get some wired exhaust nuts, tried evilbay but no luck

Use a chain guide tab washer.Cut it in half,drill the hole to m7,place over the stud,bend the cut part over the manifold and tighten the exhaust nut,then bend the tab against the nut.Do the same with the other one.

HxPaul wrote:

essexgp wrote:Anybody know where i can get some wired exhaust nuts, tried evilbay but no luck

Use a chain guide tab washer.Cut it in half,drill the hole to m7,place over the stud,bend the cut part over the manifold and tighten the exhaust nut,then bend the tab against the nut.Do the same with the other one.

Thanks for the picture and explanation