Page 1 of 1
jetting on a Pinasco kit
Posted: Thu Sep 18, 2014 5:47 pm
by oggyogden40
Hello people , My son is having a Pinasco 177 kit fitted Saturday morning ! At the minute its got a Polini pipe and drilled air filter running a 106 main jet, Question ideas on jetting size ? I know its a mind field !! Thanks in advance Danny the father of a scooter nut case lol
Re: jetting on a Pinasco kit
Posted: Fri Sep 19, 2014 1:02 pm
by wack 63
Try Armando's
Re: jetting on a Pinasco kit
Posted: Sat Sep 20, 2014 2:15 pm
by gaz_powell
I would start at 112 and go down - 106 is to small
I used 112 on a 24mm carb with this kit and a pm exhaust that I built for someone
Re: jetting on a Pinasco kit
Posted: Mon Sep 22, 2014 11:02 am
by oggyogden40
We asked Armando's and he they wouldn't comment !!!!! He has put a 114 main in and its running fine so he's going to get a few miles on the clock then do a plug chop , Cheers for the advice lads, Danny