ts1 with diablo tank, mikuni on a series1. filter options

[cezeta]

im using a diablo tank on my series1 ts1. i want to use a filter on the carb, any ideas

[cezeta]

that will be a no then

[Ian Hepworth]

How much space have you got?

[Juan]

Maybe PM Al to see if he's got an idea?

[J1MS]

Panels are made to be cut... :baddevil:

[davidblythe]

S3 No chance

S2 okay run the remote hose horizontal under the tank

my GP with cut toolbox

[sean brady scooters]

just how does any fresh/cool air find its way into that..................?

[davidblythe]

its a rolling test bed, so as one problem is solved another one develops

i enjoy the process, it keeps me amused

[sean brady scooters]

hope you can improve on the" rolling" stage dave ,and get it "rocking"............

[RBG]

Make your own I did buy the foam & some glue.
Twinair motocrosser filter blanked off with foam & a hole cut in for carb
My RB22/mikuni 35mm tmx runs well with it on a GP.
Now fitted with a Diablo tank.
The panel does push the filter closer to the carb mouth but the filter still has a large internal area.