Powerjet on Dellorto PHBL 25

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
User avatar
Pepot
Posts: 73
Joined: Sun Aug 05, 2012 10:45 pm
Main scooter: servetta LI150 serieIII GT186
Contact:
Contact Pepot

Hi! is there any aftermarket powerjet that can be fitted to a PHBL 25? thanks!
Top
Knowledge
Dealer
Posts: 957
Joined: Sun Jan 11, 2009 12:49 am
Main scooter: GP
Location: Ipswich
Contact:
Contact Knowledge

Cam Lam's power jet fits the PHBH 26mm - 30mm, but it might be worth asking them if it can be fitted to the PHBL.

What problem are you trying to cure with the power jet?
Martin
Top
User avatar
Pepot
Posts: 73
Joined: Sun Aug 05, 2012 10:45 pm
Main scooter: servetta LI150 serieIII GT186
Contact:
Contact Pepot

Overrich up to a 1/4th throttle, even with a 50 pilot, but perfect past this point. Wonderful on a higway but awful in the city. I guess that some fuel is outgoing through needle and atomiser,so if I fit a leaner atomiser or needle, I'd like to compensate with a powerjet. Thanks for answering knowledge! I've seen the camlam's kit, but is not anounced which carbs fit. I'll ask them.
Top
rosscla
registered user
Posts: 4823
Joined: Tue Oct 25, 2011 9:50 pm
Main scooter: Lambretta
Location: Lanarkshire
Contact:
Contact rosscla

You need enough room in the throat, before the slide, of the carb to drill and tap the power jet into.

What slide do yo have in?
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
Top
User avatar
Pepot
Posts: 73
Joined: Sun Aug 05, 2012 10:45 pm
Main scooter: servetta LI150 serieIII GT186
Contact:
Contact Pepot

Its a 40 roundslide.
Top
User avatar
byron
registered user
Posts: 1226
Joined: Wed Jan 07, 2009 11:45 am
Main scooter: Li Special; scarred,but sound
Location: norwich
Contact:
Contact byron

try a weaker slide before fitting a powerjet...
Top
rosscla
registered user
Posts: 4823
Joined: Tue Oct 25, 2011 9:50 pm
Main scooter: Lambretta
Location: Lanarkshire
Contact:
Contact rosscla

byron wrote:try a weaker slide before fitting a powerjet...
That's where I was headed 8-)
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
Top
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:
Contact soulsurfer

I have a CamLam PJ fitted to a PHBL25 on a GT186... It fits fine
Turn On, Tune In, Cop out!
Top
User avatar
Pepot
Posts: 73
Joined: Sun Aug 05, 2012 10:45 pm
Main scooter: servetta LI150 serieIII GT186
Contact:
Contact Pepot

Thanks for the advice Byron and Rosscla. Soulsurfer,mine is a GT186 too. With a BGM bigbox V2 exhaust and a BGM ignition with a Khepper programmable CDI. I use a standard airbox W/O strangle neck and a BGM metalic air filter. What are your carb settings,please? Thanks again for your replies!
Top
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:
Contact soulsurfer

Pepot wrote:Thanks for the advice Byron and Rosscla. Soulsurfer,mine is a GT186 too. With a BGM bigbox V2 exhaust and a BGM ignition with a Khepper programmable CDI. I use a standard airbox W/O strangle neck and a BGM metalic air filter. What are your carb settings,please? Thanks again for your replies!
r
Just seen this, but replied to your pm, feel fee to post the reply here ;)
Turn On, Tune In, Cop out!
Top
Post Reply Previous topicNext topic

Return to “Lambretta Tech”

  • Information

  • Who is online

    Users browsing this forum: Ahrefs [Bot] and 32 guests

Powered by phpBB™ • Design by PlanetStyles