Page 1 of 1
carb setup for rt230 reedvalve
Posted: Fri Jul 11, 2014 7:24 pm
by biddy
Hi I was running a rt230 bgm exhaust ,30 del, 121 main ,pilot 58 ,x7,av266 now the problem is after putting an reedvalve on it now and was wondering what I up jet to running same set up now but a 140 main .hear some where you go up 20% on main jet would this be right
Many thanks of help
Re: carb setup for rt230 reedvalve
Posted: Sat Jul 12, 2014 9:18 am
by Timbo
Have you asked MB?
Re: carb setup for rt230 reedvalve
Posted: Sat Jul 12, 2014 9:31 am
by Adam_Winstone
Biddy, you getting this ready for Shipston?
Re: carb setup for rt230 reedvalve
Posted: Sat Jul 12, 2014 10:22 am
by biddy
No Adam not going shipton too much going on over here at the moment next one will be malton af thing . Guinea and hickey are going
Re: carb setup for rt230 reedvalve
Posted: Sat Jul 12, 2014 11:44 am
by mickjr
email him threw his own shop email,he has a rt lambretta group on facebook,which he gets back to you pretty quick
http://www.lambrettaspares.com/info/lam ... rs+53.html
Re: carb setup for rt230 reedvalve
Posted: Sat Jul 12, 2014 12:03 pm
by SpanishSX200
I have that kit!
PHBH 30
Pilot 50
Slide 40
Choke 70
X13 needle 2nd clip
350 float/needle valve
AV 268 atomiser
130 main
Bit rich around quarter throttle but clean as when giving it some!
Ron Moss clubman
Simon
Re: carb setup for rt230 reedvalve
Posted: Sat Jul 12, 2014 2:06 pm
by Adam_Winstone
^... Simon, nice answer
Biddy, OK, I'll see you when I see you
x
Adam