ADS3 or Franspeed Super Tourer.

[Rally220]

Looking to change the exhaust on my TS1 230, currently running a SSC Taffy copy, looks good but doesn't perform all that well. Wanted a Super Tourer in stainless but Andy F says out of stock and will be for foreseeable. So now looking at Chiselspeed ADS3 or Super tourer in steel, going to get it ceramic coated anyway. Any one had experience? I use the scoot for Rallys/ Fast road use. I'm also considering getting the TS1 barrel tuned by Harry Barlow ( Pro Porting). Cheers.

[camel]

i use the ads 3...personally i like it but ive had to modify it to make it quieter,..it wont rev past 6.2k revs but pulls really well,so you have to up the gearing massivly to pull higher speeds....currently im on 4.4 final drive but im going to reduce this to ride easier
if i had a ts1 again id certainly consider the nk rally by rayspeed...as basically its made by the ads quys but revs a little higher

[belly]

I was running a copy taffy pipe on my ts230 until recently. Have now fitted an AF NK tour/road pipe, it has transformed the bike. Fitted easy, running 4.7 final drive and it pulls like a train