Scooterotica

I'm going to be changing the end can on my dev tour pipe to something a bit more trick. The question is will this affect the jetting or is it relevant just when you change the whole pipe. Cheers boys.

As long as the internal baffle tube isn't smaller diameter it shouldn't make any difference

I asked a similar question a while back as I once read something about the differences with length etc but didn't really get an exact answer.

ive used a crosser can to dampen the noise on my ads3,as previously said make sure the bore of the pipe is no smaller than the origional,my can is a little longer but it hasnt affected performance