ts1 with diablo tank, mikuni on a series1. filter options
Posted: Wed May 27, 2009 11:19 pm
im using a diablo tank on my series1 ts1. i want to use a filter on the carb, any ideas 
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
ts1 with diablo tank, mikuni on a series1. filter options
Page 1 of 2
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:04 pm
that will be a no then
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:05 pm
How much space have you got?
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:09 pm
Maybe PM Al to see if he's got an idea?
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:17 pm
Panels are made to be cut... :baddevil:
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:19 pm
S3 No chance
S2 okay run the remote hose horizontal under the tank
my GP with cut toolbox
S2 okay run the remote hose horizontal under the tank
my GP with cut toolbox
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:28 pm
just how does any fresh/cool air find its way into that..................? 
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:38 pm
its a rolling test bed, so as one problem is solved another one develops
i enjoy the process, it keeps me amused
i enjoy the process, it keeps me amused
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 10:48 pm
hope you can improve on the" rolling" stage dave ,and get it "rocking"............
Re: ts1 with diablo tank, mikuni on a series1. filter options
Posted: Thu May 28, 2009 11:18 pm
Make your own I did buy the foam & some glue.
Twinair motocrosser filter blanked off with foam & a hole cut in for carb
My RB22/mikuni 35mm tmx runs well with it on a GP.
Now fitted with a Diablo tank.
The panel does push the filter closer to the carb mouth but the filter still has a large internal area.
Twinair motocrosser filter blanked off with foam & a hole cut in for carb
My RB22/mikuni 35mm tmx runs well with it on a GP.
Now fitted with a Diablo tank.
The panel does push the filter closer to the carb mouth but the filter still has a large internal area.