Page 1 of 2
bgm flywheel/ varitronic stator
Posted: Sat Jun 14, 2014 10:12 pm
by tea5ive
oes anyone know if a bgm flywheel will work with a varitronic stator ?. cheers simon
Re: bgm flywheel/ varitronic stator
Posted: Sun Jun 15, 2014 4:04 am
by Grumpy225
No
BGM is a 6 pole flywheel (you can't see the magnets but there are 6 of them) where the varitronic is a 4 pole.
Re: bgm flywheel/ varitronic stator
Posted: Sun Jun 15, 2014 5:45 am
by jonashford
I couldnt get it to work with any a kytronic or agusto
Re: bgm flywheel/ varitronic stator
Posted: Mon Jun 16, 2014 1:17 pm
by corrado
jonashford wrote:I couldnt get it to work with any a kytronic or agusto
BGM flywheel or Varitronic stator?
Re: bgm flywheel/ varitronic stator
Posted: Mon Jun 16, 2014 1:42 pm
by jonashford
Bgm flywheel
Re: bgm flywheel/ varitronic stator
Posted: Tue Jun 17, 2014 10:40 pm
by GP Kevo
I think those add-on boxes (Kytronik and Agusto) require a genuine Ducati CDI. There is a revised Kytronik that is said to work with all Ducati - Vespa PX type CDI's.
Re: bgm flywheel/ varitronic stator
Posted: Wed Jun 18, 2014 6:15 am
by jonashford
bgm flywheel doesnt work with the agusto which has been out for ages, ducatti or bgm cdi!!!! which is poor IMO
Re: bgm flywheel/ varitronic stator
Posted: Wed Jun 18, 2014 8:01 am
by jason frost
jonashford wrote:I couldnt get it to work with any a kytronic or agusto
What was happening with the kytronic ?
Re: bgm flywheel/ varitronic stator
Posted: Wed Jun 18, 2014 9:50 am
by jonashford
Timing was bouncing incorrectly between 26 & 16 degrees, put the Indian flywheel on & was perfect, believe me I tried everything then just gave up
Re: bgm flywheel/ varitronic stator
Posted: Wed Jun 18, 2014 10:10 am
by jason frost
jonashford wrote:Timing was bouncing incorrectly between 26 & 16 degrees, put the Indian flywheel on & was perfect, believe me I tried everything then just gave up
Just setting mine up now with BGM flywheel,stator,coil and kytronic. Timing mark is spot on at 23, no movement at all when its revved on the 0 setting