have a Ron Moss avanti head on my Rb with one of his fibreglass cowellings. Also had a fibreglass flywheel cowelling from http://www.angliascooters.co.uk/proddet ... ambflycowl . Took a lot of fettling to get the two to marry up, but one of the fixings let go and the flywheel shredded the cowelling. I now need a new cowelling but wanted something a bit trick. Has anyone else had any issues with matching one to a Ron Moss cowelling?
The Pm tuning one looks trick but a bit lumpy price wise, anything similar in fibreglass available?
Ta
Sef
Ron Moss cowelling
-
sydduckett
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
-
coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
Not absolutely clear what you are asking there but both my scoots have Avanti cowls, one with full Avanti top end and the other Avanti head on a TS1. Both have a base packed 110 rod) and are mated to shortened Indian deep fin fan cowls with no issues in fit at all.
-
sydduckett
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
The issue with the Two not fitting was a combination of things, both parts being fibreglass and having little in the way of flexibility being the main one I think. The other one being that the cowling sat somewhere between a deep one and a shallow one, the fins were so close to the back of the cowling I had to Dremel loads out so they would clear the back of the cowling. At some point one of the fixings let go and the two came into contact...bam.coaster wrote:Not absolutely clear what you are asking there but both my scoots have Avanti cowls, one with full Avanti top end and the other Avanti head on a TS1. Both have a base packed 110 rod) and are mated to shortened Indian deep fin fan cowls with no issues in fit at all.
I do like the design and may yet get another one or maybe butcher a standard one....
