200 cylinder head
was thinking of fitting a new cylinder head on my mates cast iron stage four,,,wot would people recommend .....cheers steve
-
Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
An Indian one. Apparently the casting is thicker and they are less prone to warping, or something.
no compression issues with indian ones? was looking to get a reworked one from af..........
No problems at all with S.I.L heads,as in previous post,nice thick casting,i have S.I.L heads on Mrs kevspeeds stage 4,my TS1,and my AF 250.
-
handofdave
- registered user
- Posts: 79
- Joined: Fri Jun 10, 2011 11:35 pm
- Main scooter: li ts1
martin at chiselspeed will machine one to the profile of your make of piston and correct cr
what is Correct cr these days ?handofdave wrote:martin at chiselspeed will machine one to the profile of your make of piston and correct cr
AF list 3 200cc Heads, 8:1 , New Type 9.5:1 and STD (what ever that is ).
win or lose have a booze
thats wot im trying to ask yamlam...........
-
handofdave
- registered user
- Posts: 79
- Joined: Fri Jun 10, 2011 11:35 pm
- Main scooter: li ts1
i always use 9.5:1