Page 1 of 1
front hub 1988 px125
Posted: Sun Mar 16, 2014 9:38 am
by nam65
Hi all
would the shaft for the front hub on a 1988 px125 efl be 20mm or 16mm
thanks in advance
Re: front hub 1988 px125
Posted: Sun Mar 16, 2014 9:58 am
by Ginch
16mm
20mm
Re: front hub 1988 px125
Posted: Sun Mar 16, 2014 11:09 am
by nam65
Hi
that's great thanks
Re: front hub 1988 px125
Posted: Sun Mar 16, 2014 11:23 am
by Jack221
20mm
Re: front hub 1988 px125
Posted: Sun Mar 16, 2014 8:35 pm
by goldeneye
I"d say 20mm as well. there are a lot of what you would call "crossover m1 and a half" px"s , with a mish mash of mk1 and EFL bits, but by 1988, I"d say all piaggio made PX"s had 20mm front axles. most of the cross over model would be "Y" or "A" regs, whats "88? F reg?
Re: front hub 1988 px125
Posted: Sun Mar 16, 2014 10:06 pm
by OzOAP
Best P Ranges ever made, A/B (mk1and 1/2). Pre EFL round shape headset with ign, panel locks and auto lube.
'88 will be 20mm. AFAIK post '83 is 20mm.
Re: front hub 1988 px125
Posted: Sun Mar 16, 2014 10:22 pm
by acko
My 1982 Mk 1 has 16mm axle so sounds right to me Oz.
Re: front hub 1988 px125
Posted: Mon Mar 17, 2014 1:18 pm
by nam65
cheers all
Re: front hub 1988 px125
Posted: Mon Mar 17, 2014 2:29 pm
by gaz_powell
my Y reg 1983 mk 1.5 is 20mm
defo 20mm would have been fitted at factory on an 1988...... are they original ?
you can tell my looking at the link