Page 1 of 1
BGM 60mm Cranks
Posted: Mon Mar 10, 2014 3:16 pm
by ArmandTanzarian
Has anyone heard any rumours as to when the BGM P200 60mm cranks might be back in stock?
I was going to get a Pinasco instead but my local dealer has tested a few and says that they're not very well balanced.
Re: BGM 60mm Cranks
Posted: Mon Mar 10, 2014 4:06 pm
by ArmandTanzarian
Just had an answer to my own question from BGM
Sadly we don’t have a delivery date for the crankshaft yet.
If you need a crank now, I would take this at the moment:
7676163 Crankshaft -STOFFI Racing 60mm stroke- Vespa PX200 149,00 €
Very close copy of our bgm crankshaft!
If you have time, I would wait for the bgm one.
http://www.scooter-center.com/product/7 ... URBELWELLE
Re: BGM 60mm Cranks
Posted: Mon Mar 10, 2014 8:13 pm
by joeythescooterboy
Thought the Pinasco one was supposed to be a good bit of kit?
Re: BGM 60mm Cranks
Posted: Mon Mar 10, 2014 8:39 pm
by drunkmunkey6969
joeythescooterboy wrote:Thought the Pinasco one was supposed to be a good bit of kit?
It is....
Re: BGM 60mm Cranks
Posted: Mon Mar 10, 2014 9:48 pm
by ArmandTanzarian
drunkmunkey6969 wrote:joeythescooterboy wrote:Thought the Pinasco one was supposed to be a good bit of kit?
It is....
He told me that he's had a couple that were out of balance. Since I wouldn't know how to tell a balanced crank from a poke in the eye I can't comment further.
Re: BGM 60mm Cranks
Posted: Mon Mar 10, 2014 9:52 pm
by drunkmunkey6969
I'd love to see a balanced Vespa crank.......???
Re: BGM 60mm Cranks
Posted: Tue Mar 11, 2014 8:58 pm
by parmakit kid
grt the worb 5 mazzy crank from sip its a great bit of kit just put a 60 stroke in mine iv heard some bad reports about the bgm ones
Re: BGM 60mm Cranks
Posted: Tue Mar 11, 2014 9:34 pm
by ArmandTanzarian
parmakit kid wrote:grt the worb 5 mazzy crank from sip its a great bit of kit just put a 60 stroke in mine iv heard some bad reports about the bgm ones
I think the Mazz one is a bit too radical for my very mild tune. The inlet duration is a bit long.