Rather than keep the pics going on show us you scoots , thought I'd better out it in here as its going to end up a resto .
Stripped out headset for cleaning and a little love discovered the old switch housing unit had been butchered by a Previous owner no little screw locating holes left so went to evil bay and bought a replacement one in its plain state , spent a bit of time and polished it to match the opposite side I'd done previously .shiny pic below
Also stripped out fork springs and linkage for new parts and decided to add a set of fork dampers , a little searching on the net came up with the relevant position so dressed primed forks measured and welded into position
Ready for paint now next week .
