Page 1 of 1
Li150 kickstart
Posted: Fri Feb 21, 2014 8:36 pm
by philz
My kickstart sits about 1/2inch lower than the stop. Is this normal and if not what's the problem?
Re: Li150 kickstart
Posted: Fri Feb 21, 2014 10:29 pm
by rosscla
Turn it round a spline?
Re: Li150 kickstart
Posted: Fri Feb 21, 2014 10:43 pm
by bristolmod
adjust the internal ramp
Re: Li150 kickstart
Posted: Sat Feb 22, 2014 1:09 am
by philz
If I adjust it on the spline it's then too high and the gearbox rumbles. I will have adjust the ramp then. Looks like I will have to get Stickys bible out.
Re: Li150 kickstart
Posted: Sun Mar 02, 2014 9:10 pm
by olliewtf
did this recently when fitting a new chain case and found the easiest way for me to get the kickstarter sitting in the recess but the ramp at the right adjustment was to lever the kickstarter against my chest and push the casing away from me rather than faffing around with clamps etc... dunno if that makes any sense but hey ho!