Scooterotica

Hi has anyone got a simple wiring diagram for a Vespa cutdown/ chopper. My scoot is a Mk 1 P125x with no battery. I don't want indicators, i am using one of those off/on/dip/horn switches, simple on/off ignition switch and black caged headlights from Beedys . Oh n what is the yellow wiring on my scoot. Thanks

I'm sure Nik skeat did a basic loom diagram on SBW a while back Sye.

And I think the yellow wire is for your horn.

I will have a look on our forum mate. Thanks.

I have a similar setup on a chop I've done over the winter. The loom came from Beedspeed and is very simple. It arrived with a wiring diagram, which i'll try and take a picture of tomorrow and send it to you.

The problem i have is that i can't get the brake light to work when the lights are on. It simply turns the lights off when i press the brake. Turn the lights off and i have a brake light. Any ideas where i have gone wrong?

Sorry to hijack your thread mate.
Andy

P.S. As Joey says........Yellow and blue are for the horn.

Bullhead71 wrote:Hi has anyone got a simple wiring diagram for a Vespa cutdown/ chopper. My scoot is a Mk 1 P125x with no battery. I don't want indicators, i am using one of those off/on/dip/horn switches, simple on/off ignition switch and black caged headlights from Beedys . Oh n what is the yellow wiring on my scoot. Thanks

Most basic loom you can get mate is a lambretta 12v electronic loom.
I have fitted a few of them and they are easy and simple.
It will give you 3 wires to the headset and from there you can spru to switch and drop to horn.

It really is 'simples'

Scootopia do one, but so will all other dealers as well for about £15.

Shaun.