Page 1 of 2
Dyno tuner in Kent area
Posted: Mon Dec 30, 2013 7:06 pm
by Nerdy Norm
Can anyone recommend a Lam/Vespa specialist for dyno setup in the south-east, ideally Kent?
There seem to be plenty in the midlands and north, but that's a bit of a hike for me...
Re: Dyno tuner in Kent area
Posted: Mon Dec 30, 2013 7:54 pm
by OzOAP
Pro Design in Littlehampton. 01903 718105
Re: Dyno tuner in Kent area
Posted: Tue Dec 31, 2013 11:32 am
by Nerdy Norm
Thanks, but that's still a good couple of hours drive for me.
Anyone know somewhere closer to Folkestone/Dover/Ashford/Maidstone/Thanet/Medway etc.?
Re: Dyno tuner in Kent area
Posted: Tue Dec 31, 2013 12:24 pm
by soulsurfer
There's nobody within a couple of hours of Kent that I'd trust, I take mine to Northampton, but Roger would be my next choice, other than that I'd go to Diablo in Nuneaton. It's important to use someone that knows what they're doing with Lambrettas
Re: Dyno tuner in Kent area
Posted: Tue Dec 31, 2013 12:26 pm
by Nerdy Norm
Thanks - could you give me some pointers as to where in Northampton, and who is Roger?

Re: Dyno tuner in Kent area
Posted: Tue Dec 31, 2013 12:42 pm
by soulsurfer
Sorry, Roger is Pro-Design as mentioned earlier. The place in Northampton only dynos his own motors, I was just illustrating that it's worth travelling for the right dyno operator

Re: Dyno tuner in Kent area
Posted: Tue Dec 31, 2013 1:36 pm
by Argentopercarter
What about JB Tuning in Southend?
Quick thrash up the motorway from Dover or the Tunnel, through the Dartford crossing and turn right!
Re: Dyno tuner in Kent area
Posted: Tue Dec 31, 2013 1:45 pm
by OzOAP
I use Pro Design, 45 mins away from me, or Diablo, 3 hrs or PM, 5hrs.
Depending on what bike I want doing.
Going to someone who knows your engine is well worth it. Spending time with a decent dyno operator will teach you so much more about your bike.
Yep, forgot about JB.
Re: Dyno tuner in Kent area
Posted: Tue Dec 31, 2013 1:52 pm
by Nerdy Norm
Thanks for the tips fellas

Re: Dyno tuner in Kent area
Posted: Wed Jan 01, 2014 11:16 pm
by Jxmiddle
I'm in Kent and went to JB in Southend, he knows his stuff. Heard good things about prodesign. Don't believe there is anyone closer than these two.