where can i get.....
-
lammydave
- registered user
- Posts: 200
- Joined: Wed Jan 07, 2009 1:13 pm
- Main scooter: Li150Special RT195
- Location: Ashford, kent
- Contact:
the three bolts that replace the studs when fitting a JL type exhaust bracket to the crankcase side??
Li150 S2 1959. Li150 Special 1964. GP125 1970. Jet 200 Performer 1981. 1967 Sx150. 1959 Li150 S1. 1968 li125 Series 4
-
Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Screwfix?
The front ones are regular M8 threads, aren't they? And the smaller ones M5. Screwfix do them by the bag full.
The front ones are regular M8 threads, aren't they? And the smaller ones M5. Screwfix do them by the bag full.
CakeAndArseParty
-
DigDug
- registered user
- Posts: 788
- Joined: Wed May 02, 2012 1:00 pm
- Main scooter: Lambretta
- Location: Stroud
- Contact:
Or any other fixings, welding type place.Muttley McLadd wrote:Screwfix?
The front ones are regular M8 threads, aren't they? And the smaller ones M5. Screwfix do them by the bag full.
They won't have 'Innocenti' stamped on them though David....
Did you have to do that?
-
corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
I replaced them with 6mm threaded bar, it's much more secure, though it does make taking the chaincase off a bit more involved. I'll sort you some out if you want to go that route.