Scooterotica

Am looking to get a malossi 172 kit for my T5. Looking for somewhere to reprofile a 125 head to suit this kit. Have seen Beedspeed do this but am looking for somewhere that is recommended rather than first place I see.

Can any one recommend somewhere to get this done as never done this before with contact details etc.

Cheers

Bruce

chiselspeed are good. if you can afford one , get a MMW billet head from SIP.

try chisel speed but sip do a head as well ask pro porting about his 172 kits .

chislespeed done both of mine

why malossi talk to martin at chislespeed he did me a t5 polini with suzuki piston etc alot cheaper then a malossi kit

ducksta wrote:why malossi talk to martin at chislespeed he did me a t5 polini with suzuki piston etc alot cheaper then a malossi kit

Hmmm how much cheaper than the Malossi ????

i paid £160 for a pollini t5 barral ported, brand new suzuki ts 185 piston matched, my cylinder head re profiled+ packer plate

So £160 plus cost of a T5 Polloni barrel.....

20 years ago, my friends father turned out my T5 head, as it was centre plug, he put an old plug in then nipped it up in his lathe, then took a couple of mm from the sealing face to ensure it cleared the piston. Worked perfectly.

Morgan wrote:So £160 plus cost of a T5 Polloni barrel.....

no he provided the polini barral (2nd hand one) as he had it rebored and fettled the ports