Building an RT 225 at the moment using a 30mm PHBH, Mbgm Clubman, with Cyclone was thinking of running 18/47 sprockets but read somewhere that 19/46 is a better set up anyone have any first hand experience?
Re: RT 225/ Cyclone sprockets
Posted: Fri Nov 01, 2013 1:22 pm
by giankx
19/46 on my RT240. The engine pulls very strong in all gears, and with the close ratio of the box it will be nice also on your 225.
Re: RT 225/ Cyclone sprockets
Posted: Fri Nov 01, 2013 9:28 pm
by GP Kevo
Ask RLC what sprockets Mickyboy is running in his TV240 (MB RT240), it this is what you're after.
Re: RT 225/ Cyclone sprockets
Posted: Sat Nov 02, 2013 2:18 pm
by giankx
Micky is on 19x46 too
Re: RT 225/ Cyclone sprockets
Posted: Sat Nov 02, 2013 2:22 pm
by corrado
I could be wrong but I think the RLC Cyclone test scooter had 4.55 on a TS1. It shouldn't work but ........ IT DID.
Re: RT 225/ Cyclone sprockets
Posted: Thu Nov 07, 2013 10:32 pm
by joeswoonara
19 x 46 for me too on my TS 240
Re: RT 225/ Cyclone sprockets
Posted: Fri Nov 08, 2013 7:13 am
by Fux
19 x46 here too after advice from RLC
Re: RT 225/ Cyclone sprockets
Posted: Fri Nov 08, 2013 12:14 pm
by jonny wadd
20*46 on super monza not on the road yet , but will let u know
