Does anyone know exactly how much has to be machined off a standard SIL long fin flywheel to make it the same height as the standard flywheel (and therefore be able to fit a standard cowling).
Cheers, John
Flywheel, long fin to short
-
bristolmod
- registered user
- Posts: 1741
- Joined: Wed Jan 07, 2009 8:42 am
- Main scooter: Lambretta TV175 S3- what else!
- Location: Bali-Hai bar, Locarno Ballroom Bristol, 1967!- mines a Brown Split!!
- Contact:
a standard flywheel is 62.5mm from front of fin to back of rotor. Measure your long fin in the same way and "do the math"
Chris
Chris
Scootering since 1968.
-
Minority
- registered user
- Posts: 673
- Joined: Wed Feb 01, 2012 2:00 pm
- Main scooter: Li230 S3
- Location: Perth, Western Australia
- Contact:
For anyone else thinking of doing this, my SIL long fin flywheel measured 69mm. This means machining off 6.5mm to come to Chris's 62.5mm standard flywheel.
(See, I did manage the math Chris
)
(See, I did manage the math Chris
)