Scooterotica

Can someone please measure the rear seat catch holes on a series 3?

I am fitting a Gori seat and the last builder has welded up the 2 rear holes so I need the measurement from center to center, front to back.

Cheers.

Thanks for the help :p

Right, I mesured for about 2 hours before I drilled out the holes but I knew I was on the right track when the drill went through like butter and only filler came out..



After drilling out the rear holes...



And job done!



A big thanks to my parts pusher Corrado for the tip on the Gori seat, not being able to fit a "normal" seat beacuse my filler cap has been lovingly placed where the front hinge bolts normally are.

Can we have a youtube clip of it opening and closing then please?