Scooterotica

I just acquired some new Indian casings and the castings are very rough.

He's anybody any tips or experience tidying up all the casting flash etc.?

Last one I did was with light grit flappy wheel, boring demoralising and darn long winded but came up well
Oh and you get ally bogeys so wear a mask
Sent from my GT-I9300 using Tapatalk 2

Buying more tat Mr Clark
Get the bloody lammy finished first

Hedging my bets baz ...so I've got something to build on when it goes bang

Andy Pickering wrote:Last one I did was with light grit flappy wheel, boring demoralising and darn long winded but came up well
Oh and you get ally bogeys so wear a mask
Sent from my GT-I9300 using Tapatalk 2

He a feeling that's the direction it was going...

Andy Pickering wrote:Last one I did was with light grit flappy wheel,

What number light grit did you use please? I've got a casing to do as well and have to buy some flap wheels but they go from 40 to 400. I know the higher the number the finer the grit, but I don't want o go out and buy 400's and find they won't touch the surface.
Thanks
Phil

Ive got 40/60/80 they did the job, the type that looks like a lollypop but I woundnt suck one

Sent from my GT-I9300 using Tapatalk 2

They are also perfect for rear brake shoe fettling

Sent from my GT-I9300 using Tapatalk 2

Andy,
Thanks for the info.
Phil

I just sanded it with 100 grit and then bead blasted it the blasting smoothed out the sanding marks