Scooterotica

Has anyone tried or know if a PM End can will fit straight onto a new style AF NK Road Pipe? I have had the NK about a year now and use the scooter everyday for work. Not bothered about the neighbours at 7 in the morning, it is just so loud its doing my head in. Re packed it twice but doesn't make much difference.

i tried my mates super quiet pm end can on my ads 3(same can as yours)and it didnt make a blind bit of difference
so answer to your question...yes they do fit but it dosnt make it any quieter...
i have exactly the same problem as you...ive done a bit of research on reducing noise levels on a two stroke and im going to try exhaust heat wrap and possibly going to try and graft on either a FMF stealth motocross end can or a leo vince version of it..
i love the pipe but the noise levels are too much,a lot of noise comes from the chamber so the cheaper option of wrapping is going to be my first port of call

Cheers, saved me adding to the pile of spares in the garage. Let me know how the wrap works out.

bigmuff wrote:Has anyone tried or know if a PM End can will fit straight onto a new style AF NK Road Pipe? I have had the NK about a year now and use the scooter everyday for work. Not bothered about the neighbours at 7 in the morning, it is just so loud its doing my head in. Re packed it twice but doesn't make much difference.

Mate of mine runs a pm end can on his nk and it has made a noticeable difference in my opinion but his was loud !

toddy was it yourself who tried the darrel taylor end can?

I bought one ov these for a vespa micron & silenced that great

http://bit.ly/14p34bJ

seen those Norrie,i was just a bit concerned about the diameter of the bore of the endpipe and baffle as the nk,ads is 25mm...do you know what it is?

Will look 2mora for ya fella

I got the NK on my RT195 and the noise level is ridiculous.
So if any of you guys succeed in dumbing it down a bit.
Please let me know how you did it.

Internal Stinger?