Please Vote on your combination of BGM Stator & Flywheel that seem to work
Also please post any mods you have had to do to get it working
Thanks
Smiffy
BGM Stator/Flywheel Poll
-
- registered user
- Posts: 202
- Joined: Mon Jan 12, 2009 4:06 pm
- Contact:
BGM 120W stator with GP Elemec flywheel,no problems at fitting but can't get the timing less than 22.Apart from that, it works fine.
BGM 120W with new AF lightened,doesn't work .
I'm waiting to try the MB lightened (2Kg),this week.
BGM 120W with new AF lightened,doesn't work .
I'm waiting to try the MB lightened (2Kg),this week.
-
- Posts: 317
- Joined: Mon Jan 05, 2009 1:43 pm
- Main scooter: Reflections in Blue
- Location: Grimsby
- Contact:
Good feedback m8Dimitrios_231 wrote:BGM 120W stator with GP Elemec flywheel,no problems at fitting but can't get the timing less than 22.Apart from that, it works fine.
BGM 120W with new AF lightened,doesn't work .
I'm waiting to try the MB lightened (2Kg),this week.
Im sure the MB one will work
If its made of Metal Fettle it !!
- corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
I've just fitted this combo, no fitting issues but not tested it yet as other things, not allied to ignition, still need doing before it's a runner.Dimitrios_231 wrote:
BGM 120W with new AF lightened,doesn't work .
.
-
- registered user
- Posts: 202
- Joined: Mon Jan 12, 2009 4:06 pm
- Contact:
Couldn't get a steady tickover.
Couldn't keep the revs.
A strange sound was coming from the maghouse.
I was told that the new ones in combination with the GP mec crank that I have,didn't need any mods.Not in my case.
Couldn't keep the revs.
A strange sound was coming from the maghouse.
I was told that the new ones in combination with the GP mec crank that I have,didn't need any mods.Not in my case.
-
- registered user
- Posts: 31
- Joined: Fri Apr 03, 2009 2:42 pm
- Location: Sellindge Kent
- Contact:
I am running bgm 120 with standard sil flywheel.
I swoped from a sil stator that was in there for 6 years with no problems in serch of more power (electric) but is no better
When is some one going to do a 120 wat regulator to match
Timing wise no problems
Cheers Al
I swoped from a sil stator that was in there for 6 years with no problems in serch of more power (electric) but is no better
When is some one going to do a 120 wat regulator to match
Timing wise no problems
Cheers Al
Scream at me until my ears bleed
-
- registered user
- Posts: 171
- Joined: Wed Jan 07, 2009 11:36 am
- Main scooter: GP200E Ron Moss Supertuned !
- Contact:
BGM 120 using a standard Ducati Italian Electronic flywheel, no issues.
Old Lambrettas Never die ..................... they just go Faster !
Ron Moss says "Supertune it !"
Ron Moss says "Supertune it !"
-
- registered user
- Posts: 244
- Joined: Thu Jan 08, 2009 4:13 pm
- Location: North west
- Contact:
Bgm 120 with a jb lightened sil flywheel (plastic fan).Timed up no problem at 19 degrees.Seems to be enought stator adjustment left to fit augusto when a I've few more miles on the engine.
Af Lightened Flywheel, BGM 120W Stator and an MEC Crank. 1mm machined from the mag housing face. 300 miles with no probs whatsoever !!
-
- Posts: 317
- Joined: Mon Jan 05, 2009 1:43 pm
- Main scooter: Reflections in Blue
- Location: Grimsby
- Contact:
Any more voters
Another question are the AFR light flywheels old or new type ie new have a packer in between
boss & flywheel.
Also 120w BGM old or new ie new ie pickup is no located futher in Ie laminates taken off
from manufacture.
Another question are the AFR light flywheels old or new type ie new have a packer in between
boss & flywheel.
Also 120w BGM old or new ie new ie pickup is no located futher in Ie laminates taken off
from manufacture.
If its made of Metal Fettle it !!