Page 1 of 1
LML clutch snatch
Posted: Wed Jul 24, 2013 8:15 pm
by CPH Lambretta
I just bought an LML (2008/150/5 port/reedvalve if that makes a difference) and once in a while the clutch snatches when pulling away. It doesent do it all the time ,just once every other day or something and it catches me out everytime.Its really annoying.
I was thinking maybe warped plates or something. Anyone got an idea.
Cheers Nick
Re: LML clutch snatch
Posted: Wed Jul 24, 2013 9:24 pm
by ducksta
just take it out and check it before it happens when you dont need it too
Re: LML clutch snatch
Posted: Wed Jul 24, 2013 10:11 pm
by johnny rotten
Sounds a bit like clutch grab i had this on my p2 recently where it just suddenly lurched forward when first setting off it turned out to be the bronze bush n dished washer I've had no probs since replacing them
Re: LML clutch snatch
Posted: Thu Jul 25, 2013 9:00 pm
by CPH Lambretta
Sounds the bronze bush and pressure plate are worth a look then.
Cheers for the imput
Re: LML clutch snatch
Posted: Thu Jul 25, 2013 9:20 pm
by johnny rotten
I mean the bronze bush n dished washer that's in the clutch, apologies for any confusion