Page 1 of 1
Jetting Advice - MB/BGM 195, BGM Exhaust, 28mm Keihin
Posted: Tue Jul 02, 2013 3:49 am
by LittleBritishCar
I have a new MB/BGM RT 195 kit on the way along with a BGM big bore and a 28mm Keihin carb. Can anybody give me a starting point for the jetting? The last thing I want to do is screw up the new kit!
Re: Jetting Advice - MB/BGM 195, BGM Exhaust, 28mm Keihin
Posted: Tue Jul 02, 2013 6:44 am
by chris2470
Give MB a call, I'm sure they will be best placed to help.
Re: Jetting Advice - MB/BGM 195, BGM Exhaust, 28mm Keihin
Posted: Tue Jul 02, 2013 9:12 am
by Philipp
hello,
we used on different RT kitted bikes these jets:
idle jet 45
needle JJH 2nd clip from top
main 125
i think that should be a good starting point.
cheers philipp
Re: Jetting Advice - MB/BGM 195, BGM Exhaust, 28mm Keihin
Posted: Tue Jul 02, 2013 9:47 am
by dutch
Philipp wrote:hello,
we used on different RT kitted bikes these jets:
idle jet 45
needle JJH 2nd clip from top
main 125
i think that should be a good starting point.
cheers philipp
hi philipp, what do you think is a good starting point with the rt225 mbg big bore clubman and keihin 28mm with a breathsweet air filter.