Ehaust

[frankie]

I have bought a malossi 166 kit for my px could anyone give
me some advice on which exhaust i should use .

[goldeneye]

what do you want it to do? have you had the cases/crank done? have you a big carb fitted? what gears has it got? give us a bit of info.

[frankie]

just going to bolt the kit on and up jet the standard carb

[ducksta]

sip road

[Bifter]

Before you just bolt it on make sure you check the bore clearance as they can be very tight which will result in a sieze

[wack 63]

They work a lot better with the casings done,supposed to cool the cylinder better. As already said they are tight as new and will even seize at 30 mph . I have done a few 166's , one made 15 hp with a Simonini and 28 mm carb ,another with a Scorpion and 24 mm carb wasn't dyno'd but blew the other one away with similar weight riders. The kit benefits having the compression lowered to prevent pinking.

[frankie]

Thanks for the advice much appreciated

[Bifter]

Hate them myself ,i had one that no matter what i tried would always sieze at 50

[goldeneye]

they do need a good hone out, very tight from new. but good vfm. one of the local lads runs one just bolted on , sito plus, 24mm carb, 21 tooth clutch, goes well and a few oversizes when it needs it.