Fitting Italian drops on Indian gp
Posted: Fri May 31, 2013 6:26 am
It's there much difference in the two , I've got chance of Italian drop bars for my Indian gp wot would it need to make them fit and wots the extra cost of bits thanks
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Fitting Italian drops on Indian gp
Page 1 of 1
Re: Fitting Italian drops on Indian gp
Posted: Fri May 31, 2013 6:54 am
are you sure there 'italian drops'?
Re: Fitting Italian drops on Indian gp
Posted: Fri May 31, 2013 6:56 am
That's wot chap has told me joe brand new in primer
Re: Fitting Italian drops on Indian gp
Posted: Fri May 31, 2013 7:02 am
most drops are 'italian size' but not made in italy! i assume you will have to sort the gear change and switch housing,which are readily available poss.even swops!
Re: Fitting Italian drops on Indian gp
Posted: Fri May 31, 2013 9:30 am
Joe in gear change what does this involve ? Cost any link to part please
Re: Fitting Italian drops on Indian gp
Posted: Fri May 31, 2013 6:13 pm
a new or s/hand twist change(plenty about with the new 5 speed cyclones taking effect)all the old bits should be ok,italian size switch / lever will be needed,might have to do a little filing/fettling
Re: Fitting Italian drops on Indian gp
Posted: Fri May 31, 2013 8:37 pm
Rite anyone please can you give me a link to parts I need
Re: Fitting Italian drops on Indian gp
Posted: Sun Jun 02, 2013 6:36 am
Thanks all sorted bought gear change brand new plus lite switch housing to take master cylinder and new throttle , gear wheels