Kegra Suzuki 225 with Amal 32 mil set up?
Posted: Fri May 01, 2009 11:42 pm
Hoping somone may be able t ohelp me here. theis engine ois some whatof an old school set up that will be fitted into my cutdown and I'm looking for a rough guide as to wehee I need t ostart with the jetting.
The motor is a Kegra stage 5 Suzuki 225 kit from 1984, with a reworked Micron exhaust. I've fitted a 32mil amal to it which I bought off of Ebay, but when last used this was jetted for a TS1 225 so the jetting is out. Can anybody let me know what jets, slide, needle etc I could start off with?
The motor is a Kegra stage 5 Suzuki 225 kit from 1984, with a reworked Micron exhaust. I've fitted a 32mil amal to it which I bought off of Ebay, but when last used this was jetted for a TS1 225 so the jetting is out. Can anybody let me know what jets, slide, needle etc I could start off with?